Container ESS-40Ft Containerized Energy Storage System
Model:ESSCUBE40HMx
The ESSCUBE40HMx is a series of energy storage solutions designed in a 40ft container, for MW level and above, with a voltage platform of DC1500V. It is a high-safety, high-reliability, and standardized air-cooling energy storage container. The standardized design allows for shortening the delivery time. The system is pre-assembled and pre-commissioning before shipping, which will greatly reduce the time of on-site commissioning.The system can be transported as an entire container, which allows for reducing the on-site installation time.
- Modular design, power can be flexibly configured on demand
- Using high-power battery modules, improve power density
- IP54 protection grade design, strong environmental applicability
- Support on-grid working modes, support off-grid working mode(need external isolation transformer), meet the needs of different scenarios
- Using own-developed mature BMS, with multiple protection functions, advanced active equalization algorithm, automatic calibration algorithm, etc.
- Complete life cycle monitoring and recording of the battery system
- Advanced temperature simulation technology to ensure the consistency of battery cell operating temperature and increase battery life
- The charging and discharging period can be set according to the needs, and the peak shaving and valley filling function can be completed, saving electricity bills
Overview
AZE's 40Ft containerized battery energy storage system comes in scalable containerized modules ranging from tens of kWh to MWh energy capacities. The solutions offers plug-and-play features that allow rapid installation at low installation costs. Our turnkey solutions comes fully integrated with a smart battery management system, power conversion system and control system.Our battery technology agnostic approach allow our solutions to integrated different type of battery technologies and power conversion systems to tailor solutions to your requirements.
Modular & Scalable
Our energy storage systems are available in various capacities ranging from:
- 20 ft High Cube Container – up to 2MWh
- 40 ft High Cube Container – up to 4MWh
Containerized ESS solutions can be connected in parallel to increase the total energy capacity available to tens of MWh.
Safe and reliable
- The battery system adopts a 3-level BMS architecture with perfect protection mechanism
- Subsystems are perfectly matched for a variety of application scenarios
- IP54 protection design, built-in industrial air conditioner, good environmental adaptability
- Real-time data monitoring, full life cycle data recording
High integration
- Built-in PCS and battery system, reasonable layout and placement
- Built-in fire protection and HVAC for system security
- Adopt high-power battery modules to improve power density
- Easy on-site O&M and commissioning, plug and play
Smart and flexible
- SOC self-correction algorithm, efficient active balance
- Data visualization platform, big data analysis and report statistics
- Support remote upgrade and multiple communication methods, convenient and flexible
- Built-in EMS, a variety of operation mode options, improve income
Choices of Battery Technologies
Can select a range of battery solutions from high power or high energy lithium iron phosphate (LFP), 2nd life lithium battery , lead carbon battery and lead acid battery to provide customers with cost-effective solutions.
Ease of Configuration
The battery management system (BMS) allows the battery modules to be easily scaled in capacity. Each battery bank can be scaled serially to increase the battery voltage to match the power conversion system (PCS). Multiple battery banks each can be easily installed in parallel to increase the energy capacity.As each battery bank is fully isolated, the ESS can remain operational while respective battery banks are shut down for maintenance. In the case of critical operations, the system can remain operating while replacement of parts can be carried out. Since the PCS, battery modules and controller system are housed in separate enclosures, the ESS can be easily configured and deployed.
Redundancy for Mission Critical Applications
The system architecture of the ESS allows a design for redundancy, thereby ensuring continuous operation for mission critical application where down time is not an option.
Application
Providing a continuous and reliable supply of power from a flexible mix of conventional and renewable sources is the goal of power generation in the energy evolution.
- PV-ESS-EV charging
- C&I ESS supply
- Renewable energy grid connection
- Micro-grid
Specification
| Environmental | |
| IP (Ingress Protection) Rating | IP55,NEMA 4,NEMA 4X |
| Working Temperature | -40～55℃ |
| Physical | |
| Color | GREY RAL7035 |
| Material | Galvanized steel(Aluminum/stainless steel/Color coated steel optional) |
| Unit Dimensions (WxDxH) | 32inches x 30inches x 71.75inches |
| Unit Weight | 260lbs. |
| Shipping Dimensions(WxDxH) | 32inches x 38inches x 75inches |
| Shipping Weight | 310lbs. |
| Weight Capacity (static load) | 1000lbs. |
| Electronics | |
| Cooling | Cabinet Air Conditioner (Heat Exchanger/Thermoelectric Cooler(TEC) Optional) |
| Heating | As optional |
| Fans | DC48V |
| Power | PDU(Basic or Smart),AC/DC Power,Built-in Power Optional |
| Sensors | Door Sensor/Water Sensor/Temperature & Humidity sensor/Smoke sensor/Tilt & Shock sensor |
| Monitoring | EMS,KVM Switches,Smart PDU |
| Certifications | |
| Approvals | EIA/ECA-310-E, IEC 294-2, RoHS |
| Safety | CE |
| Warranty | |
| Standard warranty | 1 Year |
How to Order
**********Notes**********
-
Shipping Option: Assembly unit with carton or wood pallet
-
Waterproof outdoor electrical enclosures IP Rating: IP55,IP65 rated or NEMA 3R,NEMA 4, NEMA 4X rated available
-
Outdoor Enclosures Material Options: SPCC Cold Steel, Galvanized steel, Stainless steel or Aluminum available.
-
Outdoor Telecom Cabinet Cooling options: such as cooling fans, Cabinet air conditioner , Plate heat exchanger and Thermoelectric cooler available.
|
No.
|
Item
|
Specifications
|
|
1
|
AC110V or 220V/DC48V, Cooling Capacity 300W-5000W
|
|
|
2
|
DC48V, Heat transfer 40W/K-200W/K
|
|
|
3
|
DC48V, Cooling capacity 100W-300W
|
|
|
4
|
Fan
|
AC110/220V or DC 48V
|
-
A wide range of server rack accessories ,Fiber optics cabling solutions,Server Rack PDUs and KVM solutions compatablity
-
Grey(RAL7035) or other customize colors available
-
Outdoor telecom enclosure optional accessory parts
|
No.
|
Item
|
Specifications
|
|
1
|
Fan
|
AC110/220V or DC 48V
|
|
2
|
Power Supply
|
AC INPUT: 32A/1P MCB or 63A/2P MCB
DC OUTPUT: 16A/1P MCB |
|
3
|
Environment Monitoring Unit
|
48VDC Communication port: RS485, TCP/IP, SNMP optional
|
|
4
|
Door Sensor
|
Monitor door open status inside cabinet and provide real time alarm.
|
|
5
|
Water Sensor
|
Monitor water status inside cabinet and provide real time alarm.
|
|
6
|
Tilt & Shock Sensor
|
Monitor shock status inside cabinet and provide real time alarm.
|
|
7
|
Temperature & Humidity Sensor
|
Monitor temperature and humidity inside cabinet and provide real time alarm.
|
|
8
|
Smoke Sensor
|
Monitor smoke status inside cabinet and provide real time alarm.
|
Outdoor Battery Cabinet Enclosures can be customized for all Outside Plant applications - special engineering and additional equipment integration also available. Additional cabinet sizes are available. Call us or email us for information and pricing.
GET A QUOTE
While we strive to create custom products, please note that not all requests will qualify for a free prototype. Determination will depend on your project needs, quantity, and a final management review.
Let's get started, we are ready to work with you! Fill out the information below to send in your request and requirements and our team will be in touch shortly.